Category Archives: Uncategorized


Permalink to Rado – My Time Installation

Rado – My Time Installation

MVI_4720_01_e_mid

Project partners Lucy.D, supported by Philipp Hornung, created an installation for the Rado Award 2015, using the Robotic Woodcraft robot for cutting out the complex, central pieces of their design with high accuracy.

“This Installation is inspired by the philosophical theory of prolongation and compression of time. The object invites the spectators to think about their personal time”, the two designers of Lucy.D describe the idea behind the installation. The wheel is milled with the robot and is turning around its axis – by its rotation three dimensional images occur.

Rado Star Prize 2015_My time by Lucy.D_4_Fotocredit Kollektiv Fischka_red


Permalink to Woodcraft Collaboration

Woodcraft Collaboration

01_still_side_bearb2

We are currently collaborating with a team from TU Vienna’s Institute for Structural Design and Timber Engineering (project leader Baris Cokcan) towards realizing a wooden pavilion structure for an upcoming exhibition.


Permalink to AP: Robotic Woodcraft Lecture

AP: Robotic Woodcraft Lecture

Angewandte-Praxis-2015-05-06-Glaeser

As part of the Angewandte AP lecture series the Robotic Woodcraft Consortium is holding a lecture on May 6th, 5pm at HS3 at the University for Applied Arts!


Permalink to Advancing Wood Architecture

Advancing Wood Architecture

frankfurt_1

Recently, a team from the Robotic Woodcraft project attended the conference on Advancing Wood Architecture, hosted by Achim Menges of the University of Stuttgart.


Permalink to European Robotics Forum Lab Visit @ Robotic Woodcraft

European Robotics Forum Lab Visit @ Robotic Woodcraft

headererf

As part of the European Robotics Forum that took place this week in Vienna, the Robotic Woodcraft project and the University of Applied Arts Vienna offered a LabVisit that took place on the evening before the conference-kickoff.
ERF participants could visit the Austrian Institute of Technology, the RoboLab at FHTW and the Robotic Woodcraft lab.

OLYMPUS DIGITAL CAMERA

OLYMPUS DIGITAL CAMERA


Permalink to Robot Demonstration at the University for Applied Arts

Robot Demonstration at the University for Applied Arts

poster2

On December 11th, 2014, the Robotic Woodcraft team is inviting all interested staff and students of the University for Applied Arts, as well as external participants, to attend a compact robot presentation at the Department of Wood Technology. The goal of this demonstration is to showcase the new and exciting possibilities that a large robotic arm offers to creative users. Several current and past Robotic-Woodcraft projects will be presented to inspire attendees to think of new possibilities how robots can enable and inform new, creative applications. To register, please send an eMail to event@roboticwoodcraft.com

Schedule:
10:00-10:45: Robot presentation and demonstration
10:45-11:15: Presentation of realized projects
11:15-12:15: Robot programming with Grasshopper and
Rhino via KUKA|prc (optional)


Permalink to Press Event at the University for Applied Arts

Press Event at the University for Applied Arts

As part of a press conference at the University for Applied Arts, the head of the university, Dr. Gerald Bast, led the assembled journalists to the Department of Wood Technology to showcase the newly acquired KUKA robotic arm. The Robotic Woodcraft team presented him with his likeness cut into laminated wood, realized through a custom-developed parametric design script.


Permalink to Six Months of Robotic Woodcraft

Six Months of Robotic Woodcraft

At the end of May, KUKA delivered a brand-new KUKA KR120 R2500 Quantec in RAL9002 “grey-white” to the Robotic Woodcraft project at the University for Applied Arts Vienna. The project has greatly evolved from its humble beginnings when the robot was standing lonely in a corner of the wood-construction workshop. Since then, a huge amount of knowledge has been transferred from the wood-experts to the robot-experts and the other way around, with highly engaged students now already realizing parts of their diploma thesis using the robot’s multi-axis milling capabilities.


Permalink to Wood Pavilion @ AZW, Vienna

Wood Pavilion @ AZW, Vienna

As part of an inter-universitary cooperation, Robotic Woodcraft supported the robotic fabrication of the “Addition” wood pavilion. Designed by students of TU Vienna’s Institute for Timber Construction (Prof. Winter) under the guidance of Baris Cokcan, the pavilion was to be built in a extremely short timeframe in order to be ready in time for an exhibition at the AZW architecture center, located in Vienna’s famous Museumsquartier.

One of the main challenges was the multi-axis milling over several hundred knots at a low budget. After generating the robot code using Grasshopper and the Association for Robots in Architecture’s software KUKA|prc (parametric robot control), two KR16s worked in tandem to precisely mill the wooden elements.


Permalink to First Milling Experiments

First Milling Experiments

Just in time for the semester break our milling spindle has arrived! While the setup took us some time – in the age of 50EUR smartphones, configuring an expensive inverter via four buttons and a 5-digit display is… frustrating – we were still done faster than anticipated and had the chance to mill a first piece. Fellow robot enthusiast Philipp quickly designed a surface in Rhino that we then prepared for fabrication via SprutCAM and KUKA|prc. And while the final result may not be perfect yet, it turned out really fine for a first day with only very loosely calibrated tools and workflows that haven’t yet been finely tuned.
Thanks go out to Tom for providing electro-technical know-how, Philipp for the ultra-quick design, and of course to our student assistants Sebastian and Georg.
OLYMPUS DIGITAL CAMERA  OLYMPUS DIGITAL CAMERA  OLYMPUS DIGITAL CAMERA

Page 2 of 3123
Supported by...